Irrigation Pipe Repair
A broken irrigation pipe can waste water, reduce sprinkler pressure, create soggy areas in your yard, and prevent your irrigation system from watering properly. While some broken pipes create an obvious rush of water, others can leak underground and remain unnoticed until you see changes in your landscape or sprinkler performance.
At Valley Sprinkler Repair, we diagnose and repair damaged irrigation pipes, fittings, and sprinkler lines to get your system working properly again.
Signs of a Broken Irrigation Pipe
Underground irrigation leaks aren’t always easy to see. Because the pipes are buried, you may notice the effects of the problem before you actually see the damaged pipe.
Common signs of a broken sprinkler or irrigation pipe include:
- Water bubbling up from the ground
- Wet or soggy areas in the yard
- Muddy areas that don’t dry out
- Water pooling while the sprinklers are running
- Unusually green areas of lawn
- Low sprinkler pressure
- Sprinkler heads that don’t pop up completely
- Several sprinklers in one zone performing poorly
- Water running onto sidewalks or driveways
- An unexpected increase in water usage
If a sprinkler zone suddenly loses pressure or you notice water appearing where it shouldn’t, an underground irrigation leak may be the cause.
Finding the Source of the Leak
Where you see water isn’t necessarily where the pipe is broken.
Water can travel underground through soil, along pipes, and around roots before reaching the surface. That’s why simply digging where the ground looks wet doesn’t always locate the actual problem.
We inspect and operate the irrigation system to help determine which zone is affected and where the leak is likely coming from.
Once the damaged area is identified, we can expose the irrigation line and determine the appropriate repair.
What Causes Irrigation Pipes to Break?
Irrigation pipes and fittings can become damaged for many reasons.
Common causes include:
- Aging irrigation systems
- Soil movement
- Tree and shrub roots
- Landscaping work
- Digging or construction
- Damaged fittings and connections
- Stress on sprinkler risers
- Previous repairs that have failed
- Pipes that have cracked or separated
Sometimes a pipe fails suddenly, while other leaks develop slowly over time.
Broken Pipes, Fittings & Connections
Not every underground irrigation leak is caused by a cracked section of pipe.
Elbows, tees, couplings, adapters, and other fittings connect different parts of the irrigation system. These connections can crack, separate, or begin leaking.
The important part is identifying the actual source of the leak before making the repair.
Once the damaged section is exposed, we can determine whether the problem involves the pipe itself, a fitting, or another irrigation component.
Low Sprinkler Pressure
One of the most common symptoms of an irrigation pipe leak is reduced water pressure.
If several sprinklers on the same zone suddenly aren’t spraying as far as they used to, or sprinkler heads aren’t popping up completely, water may be escaping somewhere along the irrigation line.
Increasing the watering time won’t solve this problem. The lost water needs to be located and the damaged irrigation line repaired.
Irrigation Pipes Damaged by Roots
Trees and mature landscaping can create challenges for older irrigation systems.
As roots grow and soil shifts, irrigation pipes and fittings may become stressed or damaged. In some situations, the best repair may involve replacing the damaged section or rerouting a portion of the irrigation line around the obstruction.
Each situation is different, so we evaluate the area and determine a practical approach to the repair.
Why You Shouldn’t Ignore an Irrigation Pipe Leak
Even a small underground leak can waste a considerable amount of water over time.
A broken irrigation pipe may also cause:
- Higher water bills
- Poor sprinkler coverage
- Excessive watering in one area
- Soil erosion
- Muddy areas
- Landscape damage
- Reduced sprinkler pressure
- Additional damage to the irrigation system
Repairing the problem early can help prevent unnecessary water waste and keep a small repair from becoming a larger problem.
Professional Irrigation Pipe Repair
If you suspect a broken sprinkler pipe or underground irrigation leak, Valley Sprinkler Repair can help.
We’ll inspect the irrigation system, diagnose the problem, locate the affected area, and explain the recommended repair before moving forward.
Whether the problem is a cracked pipe, broken fitting, damaged connection, or another irrigation issue, our goal is to make the proper repair and restore normal operation to your system.
Schedule Your Irrigation Pipe Repair
Don’t let a broken irrigation line continue wasting water.
Schedule your irrigation pipe repair with Valley Sprinkler Repair today. We’ll find the problem, explain your repair options, and help get your irrigation system working properly again.