Leak Repair

Irrigation Leak & Valve Repair

Irrigation leaks and faulty sprinkler valves can waste water, increase your water bill, and prevent your sprinkler system from operating properly. Some problems are obvious, such as water bubbling from the ground, while others may only show up as low pressure, soggy areas, or sprinkler heads that continue leaking after the system shuts off.

At Valley Sprinkler Repair, we diagnose and repair irrigation leaks and valve problems to help get your system working properly again and stop unnecessary water waste.

Signs You May Have an Irrigation Leak or Valve Problem

Not every irrigation problem is easy to spot. Sometimes the first indication is an area of the yard that stays unusually wet or a sprinkler that continues to drip long after the watering cycle has finished.

Common warning signs include:

  • Wet or soggy areas in the lawn
  • Water pooling around sprinkler heads
  • Water bubbling or coming up from the ground
  • Sprinklers leaking when the system is turned off
  • A sprinkler zone that won’t shut off
  • A sprinkler zone that won’t turn on
  • Low pressure in one or more zones
  • Sprinkler heads that don’t pop up completely
  • Water leaking around an irrigation valve
  • Unusually green or constantly wet areas
  • Water running onto sidewalks or driveways
  • An unexplained increase in water usage

If you notice any of these problems, an irrigation inspection can help determine whether the cause is a broken pipe, fitting, sprinkler head, valve, or another component.

Irrigation Leak Detection & Repair

The location where you see water isn’t always where the leak actually started.

Water can travel underground before reaching the surface, making irrigation leaks difficult to diagnose. We operate and inspect the system to help locate the source of the problem before determining the appropriate repair.

Leaks can occur at sprinkler heads, fittings, underground irrigation lines, valves, and connections throughout the system.

Broken Irrigation Pipes & Fittings

Underground irrigation pipes and fittings can become damaged from age, soil movement, tree roots, landscaping work, or accidental digging.

A damaged irrigation line can cause excessive water loss and reduce pressure throughout an entire sprinkler zone. Once the problem area is identified, the damaged pipe or fitting can be exposed and repaired.

Sprinkler Valve Repair

Irrigation valves are an important part of your sprinkler system. Each valve controls the flow of water to a particular irrigation zone.

When a valve begins to fail, you may notice that a zone won’t turn on, won’t shut off, operates intermittently, or continues allowing water through after the watering cycle has ended.

Depending on the problem, a sprinkler valve may need to be cleaned, repaired, rebuilt, or replaced.

Sprinklers That Keep Leaking After They Shut Off

If a sprinkler continues leaking after the system has finished watering, the sprinkler head itself isn’t always the problem.

A valve that isn’t closing completely can allow water to continue flowing into the irrigation line. This may cause one or more of the lowest sprinkler heads in the zone to continue dripping or releasing water.

We can inspect the system to determine whether the problem is coming from the sprinkler head, irrigation valve, or another part of the system.

Sprinkler Zone Won’t Turn On

When an entire sprinkler zone stops working, there can be several possible causes.

The problem may involve the irrigation valve, solenoid, wiring, controller, or water supply to that particular zone. Diagnosing the problem correctly can help avoid replacing parts that aren’t actually causing the failure.

Low Sprinkler Pressure

A sudden loss of pressure can also indicate an irrigation problem.

If several sprinkler heads in the same zone aren’t popping up completely or aren’t spraying as far as they normally do, there may be an underground leak, damaged pipe, valve problem, or another restriction affecting water flow.

Rather than simply increasing the watering time, it’s important to determine why the pressure has changed.

Why Irrigation Leaks Should Be Repaired Quickly

Even a relatively small leak can waste a significant amount of water when an irrigation system operates several times each week.

Unrepaired irrigation and valve problems can contribute to:

  • Higher water bills
  • Excessive water waste
  • Overwatering
  • Landscape damage
  • Soil erosion
  • Muddy or constantly wet areas
  • Poor sprinkler coverage
  • Low water pressure
  • Larger irrigation repairs later

Addressing the problem early can help protect your landscape and keep your irrigation system operating efficiently.

Schedule Irrigation Leak & Valve Repair

If you have unexplained water, a leaking sprinkler, low pressure, or a sprinkler zone that isn’t operating correctly, Valley Sprinkler Repair can help.

We’ll inspect your irrigation system, diagnose the source of the problem, and explain the recommended repair.

Schedule your Leak & Valve Repair service today and get your irrigation system working properly again.